BLUETTI Elite 10 vs BLUETTI Premium 30 V2

Technical comparison · Ultraportable

In brief

Two plug-in LFP power stations, both small enough for a desk or a bag, that split on one choice: carry 1.7 kg with 128 Wh and 200 W, or 4.3 kg with 320 Wh and 600 W. The rest of the sheet (chemistry, protection, UPS switchover) is the same. Figures are manufacturer-declared values.

Parameter
BLUETTI Elite 10 Elite 10 BLUETTI F1 · Outlet-sized (up to 1 kWh) Check the price on Amazon
BLUETTI Premium 30 V2 Premium 30 V2 BLUETTI F1 · Outlet-sized (up to 1 kWh) Check the price at BLUETTI
Awards —
In brief
Nominal capacity 0.128 kWh 0.32 kWh
Continuous output 200 W 600 W
Peak output — 1500 W
Cell chemistry LFP (lithium iron phosphate) LFP (lithium iron phosphate)
Cost per kWh 1242.19 €/kWh 1090.62 €/kWh
List price 159 € 349 €
Weight 1.7 kg 4.3 kg
Dimensions (W×D×H) 20 × 14.6 × 11 cm 25 × 17.8 × 16.75 cm
Outlets
AC outlets Yes Yes
USB-A ports — Yes (×2)
12 V outputs — Yes (×2)
How long it lasts
Battery life cycles 1095 cicli 1825 cicli
The limit that runs out first anni di garanzia anni di garanzia
Rated cycles 3000 cicli 3000 cicli
Capacity at end of cycle life 80 % 80 %
Warranty 3 anni 5 anni
The numbers
Cost of stored energy 1.134 €/kWh 0.598 €/kWh
Energy density 75.3 Wh/kg 74.4 Wh/kg
Power-to-capacity ratio 1.56 C 1.88 C
Identity
Use tier F1 — Outlet-sized (up to 1 kWh) F1 — Outlet-sized (up to 1 kWh)
Price
Price 129 € ~200–450 €
Universal specs
Power 150 W —
Voltage 230 V —
Category specs
Depth of discharge 95 % 95 %
Fastest USB-C 100 W 140 W
Maximum charge power 0.15 kW 0.38 kW
0–80% charge time 45 min 45 min
Maximum solar input 100 W 200 W
Backup power UPS UPS
Switchover time 10 ms 10 ms
Standby consumption 4.5 W 4.5 W
Ingress protection IP20 IP20
Mounting Portable Portable
Minimum temperature -20 °C -20 °C
Maximum temperature 40 °C 40 °C
Noise level 45 dB —
App required for setup No —

JouleSpecs Awards

BLUETTI Elite 10

Lowest price range Outlet-sized (up to 1 kWh)

The lowest list price among the sheets in the Ultraportable category (outlet-sized tier): €129, as published by the manufacturer.

How we assign awards →
BLUETTI Premium 30 V2

No awards in this tier.

The differences that matter

  • 200 W vs 600 W continuous → above 200 W the Elite 10 cannot run the device; the Premium 30 V2 can.
  • 128 Wh vs 320 Wh → at the same load the Premium lasts more than twice as long.
  • 1.7 kg vs 4.3 kg → one fits in a backpack, the other is carried by hand like a small suitcase.
  • 3 years vs 5 years warranty → on both it is the limit that runs out first, before the 3000 declared cycles.

Which one to choose

Choose BLUETTI Elite 10 if…

On Monday morning it goes in your bag with the laptop and phone, and you work somewhere without a socket: USB-C reaches 100 W and you barely notice the weight. You accept that 200 W continuous is the ceiling for everything you plug in, that 128 Wh runs out quickly (in theory, at a 100 W load and without losses, a little over an hour), and that the solar panel you can connect tops out at 100 W. The warranty is 3 years.

See the BLUETTI Elite 10 sheet →

Choose BLUETTI Premium 30 V2 if…

On Monday morning it sits on the workbench or in the car boot and powers several devices at once: two USB-A ports, two 12 V outputs and a 140 W USB-C, up to 600 W continuous. In theory, at a 100 W load and without losses, 320 Wh lasts about three hours, and it takes panels up to 200 W. The price is weight, 4.3 kg, and a size that won't fit in a laptop bag. The warranty is 5 years.

See the BLUETTI Premium 30 V2 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.