BLUETTI Premium 200 V2 vs Jackery Explorer 1000 v2
Technical comparison · Home backup
BLUETTI Premium 200 V2 and Jackery Explorer 1000 v2 share the LFP chemistry and part ways on size: the BLUETTI stores roughly twice the energy and weighs more than twice as much. The question is whether you need more energy in a fixed spot or a light unit to move. Figures are manufacturer-declared.
| Parameter | ||
|---|---|---|
| In brief | ||
| Nominal capacity | 2.0736 kWh | 1.07 kWh |
| Continuous output | 2700 W | 1500 W |
| Peak output | — | 3000 W |
| Cell chemistry | LFP (lithium iron phosphate) | LFP (lithium iron phosphate) |
| Cost per kWh | 674.67 €/kWh | 746.73 €/kWh |
| List price | 1399 € | 799 € |
| Weight | 24.2 kg | 10.8 kg |
| Dimensions (W×D×H) | 35 × 25 × 32.36 cm | 32.7 × 22.4 × 24.7 cm |
| Outlets | ||
| AC outlets | Yes (×2) | Yes (×2) |
| USB-C ports | Yes (×2) | — |
| USB-A ports | Yes (×2) | — |
| 12 V outputs | Yes | — |
| How long it lasts | ||
| Battery life cycles | 1825 cicli | 1095 cicli |
| The limit that runs out first | anni di garanzia | anni di garanzia |
| Rated cycles | — | 4000 cicli |
| Capacity at end of cycle life | — | 70 % |
| Warranty | 5 anni | 3 anni |
| The numbers | ||
| Cost of stored energy | 0.37 €/kWh | 0.682 €/kWh |
| Energy density | 85.7 Wh/kg | 99.1 Wh/kg |
| Power-to-capacity ratio | 1.3 C | 1.4 C |
| Identity | ||
| Use tier | F2 — Room-sized (1–3 kWh) | F2 — Room-sized (1–3 kWh) |
| Price | ||
| Price | ~1000–2200 € | 474 € |
| Category specs | ||
| Depth of discharge | 90 % | — |
| Expandable | — | No |
| Fastest USB-C | 100 W | 100 W |
| Maximum charge power | 2.3 kW | — |
| Maximum solar input | 1000 W | 400 W |
| Backup power | UPS | EPS (brief interruption) |
| Switchover time | 15 ms | 20 ms |
| Standby consumption | 10 W | — |
| Mounting | Portable | Portable |
| Minimum temperature | -20 °C | — |
| Maximum temperature | 40 °C | — |
| Noise level | 16 dB | 22 dB |
The differences that matter
- Capacity 2.07 kWh vs 1.07 kWh → at the same load the BLUETTI should last about twice as long (in theory, ignoring losses).
- Continuous output 2700 W vs 1500 W → above 1500 W of simultaneous load you need the BLUETTI; the Jackery declares 3000 W only as a peak.
- Solar input 1000 W vs 400 W → with enough panels the BLUETTI recharges from the sun much faster.
- Backup: UPS at 15 ms vs EPS with a break at 20 ms → only the BLUETTI is declared continuous for sensitive equipment.
Which one to choose
Choose BLUETTI Premium 200 V2 if…
it stays at home as a reserve and you want declared continuity (UPS) for router and computer, with a five-year warranty instead of three. At 24.2 kg you will rarely move it. The trade-off: more weight and bulk.
Choose Jackery Explorer 1000 v2 if…
you take the station along in the car or on trips: at 10.8 kg it weighs less than half and is the easier to move. Its backup mode is declared as EPS with a short break, which needs thought for equipment that cannot tolerate an interruption. The trade-off: about half the energy, and no expansion.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.