E3/DC S10 X vs Zendure SolarFlow 4000 Mix AC+

Technical comparison · All-in-one

In brief

They do not do the same job: the E3/DC is a three-phase store installed into a house's electrical system, the Zendure a single-phase unit for an apartment. What decides it is the supply you have: three-phase up to 12,000 W or single-phase up to 3,680 W.

Parameter
E3/DC S10 X S10 X E3/DC F4 · House-sized (8–20 kWh) Check the price at E3/DC
Awards —
In brief
Usable capacity 17.4 kWh —
Continuous output 12000 W 3680 W
Cell chemistry LFP (lithium iron phosphate) —
Cost per kWh — 200 €/kWh
List price — 1600 €
Weight 155 kg 80 kg
Dimensions (W×D×H) 61 × 44 × 141 cm —
How long it lasts
Battery life cycles 3650 cicli 3650 cicli
The limit that runs out first anni di garanzia anni di garanzia
Rated cycles — 10000 cicli
Capacity at end of cycle life — 70 %
Warranty 10 anni 10 anni
Guaranteed remaining capacity 80 % —
The numbers
Cost of stored energy — 0.061 €/kWh
Energy density 112.3 Wh/kg 100 Wh/kg
Power-to-capacity ratio 0.69 C 0.46 C
Identity
Use tier F4 — House-sized (8–20 kWh) F3 — Flat-sized (3–8 kWh)
Price
Price — 1999 €
Universal specs
Voltage 230 V —
Category specs
Expandable Yes —
Maximum expanded capacity 20.6 kWh —
Phases Three-phase Single-phase
Maximum charge power 11 kW 4 kW
Backup power EPS (brief interruption) UPS
Backup phases Three-phase —
Switchover time — 10 ms
Grid charging Yes Yes
Dynamic tariffs Built in Built in
Heat pump integration Yes —
Round-trip efficiency — 90 %
Ingress protection IP20 IP65
Minimum temperature 5 °C -20 °C
Maximum temperature 35 °C 55 °C
Works without internet Fully With limitations
Local control Modbus —
Open protocols Modbus TCP, CAN bus, EEBus —
Declared standards CE, UN 38.3, VDE-AR-N 4105, IEC 62619, VDE 2510-50 —
Grid connection power — 3 kW

JouleSpecs Awards

E3/DC S10 X

No awards in this tier.

Zendure SolarFlow 4000 Mix AC+

Best value Flat-sized (3–8 kWh)

Best balance of technical score and price among the 3 sheets in the All-in-one category (flat-sized tier): list price €1999, technical score 79/100.

How we assign awards →

The differences that matter

  • Continuous output 12,000 W vs 3,680 W, grid charging 11 kW vs 4 kW → the Zendure fills more slowly and the heavier loads stay on the grid.
  • Three-phase vs single-phase → on the E3/DC the load is spread over three phases; on the Zendure it all sits on one.
  • Backup EPS vs UPS → on the E3/DC a blackout means a brief interruption; the Zendure is declared as continuous.
  • IP20 and 5–35 °C vs IP65 and −20–55 °C → the E3/DC needs an enclosed, temperate room; the Zendure tolerates an unheated spot.

Figures are as declared by the manufacturer.

Which one to choose

Choose E3/DC S10 X if…

you have a three-phase house and want it to keep working when the internet is down: the E3/DC is declared fully operational offline. It goes indoors and weighs 155 kg against the Zendure's 80, so plan on giving it a room of its own.

See the E3/DC S10 X sheet →

Choose Zendure SolarFlow 4000 Mix AC+ if…

you live in an apartment on a single-phase supply and have no utility room: it weighs 80 kg against 155 and does not take over a room. You accept much lower power and, without internet, reduced operation: the E3/DC is declared to run fully.

See the Zendure SolarFlow 4000 Mix AC+ sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.