sonnenBatterie 10 performance vs Zendure SolarFlow 4000 Mix AC+

Technical comparison · All-in-one

In brief

The choice turns on what the battery must do when the grid is gone. sonnenBatterie 10 performance is three-phase and delivers 7 kW continuous, but with no backup power it does not feed the house in an outage; Zendure SolarFlow 4000 Mix AC+ is single-phase at 3.7 kW and keeps running. Figures are manufacturer-declared.

Parameter
Awards —
In brief
Usable capacity 10 kWh —
Continuous output 7000 W 3680 W
Cell chemistry LFP (lithium iron phosphate) —
Cost per kWh — 200 €/kWh
List price — 1600 €
Weight 165 kg 80 kg
Dimensions (W×D×H) 69 × 36 × 172 cm —
How long it lasts
Battery life cycles 3650 cicli 3650 cicli
The limit that runs out first anni di garanzia anni di garanzia
Rated cycles 10000 cicli 10000 cicli
Capacity at end of cycle life — 70 %
Warranty 10 anni 10 anni
The numbers
Cost of stored energy — 0.061 €/kWh
Energy density 60.6 Wh/kg 100 Wh/kg
Power-to-capacity ratio 0.7 C 0.46 C
Identity
Use tier F4 — House-sized (8–20 kWh) F3 — Flat-sized (3–8 kWh)
Price
Price — 1999 €
Category specs
Expandable Yes —
Maximum expanded capacity 50 kWh —
Phases Three-phase Single-phase
Maximum charge power 7 kW 4 kW
Backup power None UPS
Backup phases None —
Switchover time — 10 ms
Grid charging — Yes
Dynamic tariffs — Built in
EV charger integration Yes —
Virtual power plant sonnenVPP —
Round-trip efficiency — 90 %
Ingress protection IP30 IP65
Minimum temperature -5 °C -20 °C
Maximum temperature 45 °C 55 °C
Works without internet — With limitations
Declared standards VDE-AR-N 4105, UN 38.3, IEC 62619, VDE 2510-50 —
Grid connection power — 3 kW

JouleSpecs Awards

sonnenBatterie 10 performance

No awards in this tier.

Zendure SolarFlow 4000 Mix AC+

Best value Flat-sized (3–8 kWh)

Best balance of technical score and price among the 3 sheets in the All-in-one category (flat-sized tier): list price €1999, technical score 79/100.

How we assign awards →

The differences that matter

  • Three-phase → single-phase: the first is built for a three-phase installation, the second for a single-phase one.
  • Backup power: none → UPS, 10 ms: in an outage only the Zendure keeps connected loads running.
  • Expandable up to 50 kWh (sonnenBatterie): you start at 10 kWh and add modules as consumption grows.
  • IP30 → IP65: a dry indoor room against a more exposed spot.

Which one to choose

Choose sonnenBatterie 10 performance if…

the house is three-phase and you want a 7 kW battery with 10 kWh usable, charging at up to 7 kW, that can grow to 50 kWh by adding modules and talks to the EV charger and to the sonnenVPP virtual power plant. The trade-off: no backup power, so an outage leaves the house dark, and IP30 means a dry indoor room.

See the sonnenBatterie 10 performance sheet →

Choose Zendure SolarFlow 4000 Mix AC+ if…

a single-phase battery of 3,680 W is enough and connected loads must stay on through an outage, with a declared 10 ms switchover. IP65 and -20 to 55 °C allow a spot outside the living space, and it keeps working in reduced mode without internet. The trade-off: 3,680 W instead of 7,000 W continuous, charging capped at 4 kW and a declared connection power of 3 kW.

See the Zendure SolarFlow 4000 Mix AC+ sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.