BLUETTI Elite 30 V2 vs Jackery Explorer 300 Plus

Technical comparison · Ultraportable

In brief

With the same nominal capacity (288 Wh for both), the deciding difference is how each handles load and backup power: the Elite 30 V2 doubles continuous output and switches to battery without any drop, the Explorer 300 Plus stays lighter.

Parameter
BLUETTI Elite 30 V2 Elite 30 V2 BLUETTI F1 · Outlet-sized (up to 1 kWh) Check the price on Amazon
Awards —
In brief
Nominal capacity 0.288 kWh 0.288 kWh
Continuous output 600 W 300 W
Peak output 1500 W 600 W
Cell chemistry LFP (lithium iron phosphate) LFP (lithium iron phosphate)
Cost per kWh 968.75 €/kWh 968.75 €/kWh
List price 279 € 279 €
Weight 4.3 kg 3.75 kg
Dimensions (W×D×H) 25 × 17.8 × 16.75 cm 23 × 15.5 × 16.7 cm
Outlets
AC outlets Yes Yes
How long it lasts
Battery life cycles 1825 cicli 1095 cicli
The limit that runs out first anni di garanzia anni di garanzia
Rated cycles 3000 cicli 3000 cicli
Capacity at end of cycle life 80 % 80 %
Warranty 5 anni 3 anni
The numbers
Cost of stored energy 0.531 €/kWh 0.885 €/kWh
Energy density 67 Wh/kg 76.8 Wh/kg
Power-to-capacity ratio 2.08 C 1.04 C
Identity
Use tier F1 — Outlet-sized (up to 1 kWh) F1 — Outlet-sized (up to 1 kWh)
Price
Price 199 € 279 €
Category specs
Depth of discharge 95 % —
Expandable — No
Fastest USB-C 140 W 100 W
Maximum charge power 0.38 kW —
0–80% charge time 45 min —
Maximum solar input 200 W 100 W
Backup power UPS EPS (brief interruption)
Switchover time 10 ms 20 ms
Standby consumption 4.5 W —
Ingress protection IP20 —
Mounting Portable Portable
Minimum temperature -20 °C -10 °C
Maximum temperature 40 °C 45 °C
Noise level 30 dB 45 dB
App required for setup No No
Declared standards — CE, UN 38.3

JouleSpecs Awards

BLUETTI Elite 30 V2

Best value Outlet-sized (up to 1 kWh)

Best balance of technical score and price among the 14 sheets in the Ultraportable category (outlet-sized tier): list price €199, technical score 67/100.

How we assign awards →
Jackery Explorer 300 Plus

No awards in this tier.

The differences that matter

  • Continuous output: 600 W vs 300 W → the Elite 30 V2 runs appliances the Explorer 300 Plus can't sustain continuously.
  • Warranty: 5 years vs 3 → more coverage for the Elite 30 V2.
  • Noise level: 30 dB vs 45 → the Elite 30 V2 stays near-silent, the Explorer 300 Plus is clearly audible in a room.
  • Backup power: UPS continuity vs EPS with a brief pause → a design choice: the Elite 30 V2 keeps the load powered, the Explorer 300 Plus has a short gap.

Which one to choose

Choose BLUETTI Elite 30 V2 if…

Pick the Elite 30 V2 if you need to run appliances up to 600 W continuously and want true continuity (UPS) when it switches to battery, plus near-silent operation (30 dB). In exchange you carry about 550 g more, though the warranty still reaches 5 years vs 3.

See the BLUETTI Elite 30 V2 sheet →

Choose Jackery Explorer 300 Plus if…

Pick the Explorer 300 Plus if a load up to 300 W is enough and you prefer the lighter of the two (3.75 kg vs 4.3). You accept a brief interruption when switching to battery (EPS instead of UPS) and louder operation (45 dB vs 30).

See the Jackery Explorer 300 Plus sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.