sonnenBatterie 10 hybrid — All-in-one
sonnenBatterie 10 hybrid
All-in-one F3 · Flat-sized (3–8 kWh)

sonnen sonnenBatterie 10 hybrid

Price
Not available

JouleSpecs does not sell and does not show shop prices: check the price where you buy.

Data from official source

sonnenBatterie 10 hybrid is a residential storage unit with lithium iron phosphate cells and a hybrid inverter included in the system. Capacity starts at 5.5 kWh and grows in 5.5 kWh steps up to 27.5 kWh by adding battery modules to the cabinet. It has an integrated backup power module: during a power outage it supplies only the selected appliances, not the whole home. It is compatible with Tigo Energy module optimizers. The grid connection is three-phase. Several units of this model cannot be connected together, so growth stops at 27.5 kWh.

01 · Verified data

Technical specifications

Usable capacity 5 kWh
Cell chemistry LFP (lithium iron phosphate)
Round-trip efficiency sonnen does not state it.

where we looked

Standby consumption sonnen does not state it.

where we looked

Parameter Value Source
Dimensions 69 × 36 × 172 cm (27.2 × 14.2 × 67.7 in) manufacturer website
Usable capacity 5 kWh Declared by the brand
Nominal capacity 5.5 kWh Declared by the brand
Cell chemistry LFP (lithium iron phosphate) Declared by the brand
Expandable Yes Declared by the brand
Maximum expanded capacity 25 kWh Declared by the brand
Continuous output 2500 W Declared by the brand
Phases Three-phase Declared by the brand
Maximum charge power 2.5 kW Declared by the brand
Backup power EPS (brief interruption) Declared by the brand
Backup phases Three-phase Declared by the brand
Switchover time 5000 ms Declared by the brand
EV charger integration Yes Declared by the brand
Rated cycles 10000 cicli Declared by the brand
Warranty 10 anni Declared by the brand
Ingress protection IP30 Declared by the brand
Minimum temperature -5 °C Declared by the brand
Maximum temperature 45 °C Declared by the brand
Noise level 35 dB Declared by the brand
Depth of discharge — Not declared
Cell supplier — Not declared
Battery voltage — Not declared
Declared compatible inverters — Not applicable
Black start — Not declared
Grid charging — Not declared
Dynamic tariffs — Not declared
Heat pump integration — Not declared
Virtual power plant — Not declared
Capacity at end of cycle life — Not declared
Guaranteed throughput — Not declared
Guaranteed remaining capacity — Not declared
Round-trip efficiency — Not declared
Standby consumption — Not declared
Mounting — Not declared
Cell heating — Not declared
Works without internet — Not declared
Local control — Not declared
Open protocols — Not declared
Home Assistant integration — Not declared
Where the data is hosted — Not declared
Remote updates — Not declared
App required for setup — Not declared
Declared standards — Not declared
Battery passport — Not declared
Carbon footprint — Not declared
Recycled content — Not declared
Grid connection power — Not declared
Official list price — Not declared

Which documents this page rests on

The rest of the data comes from one page on the manufacturer's site, cited row by row in the table above.

A manual or a datasheet counts as a source even when the original file is hosted elsewhere: what matters is the document, not the server. Where that happens, it is stated above.

02 · The numbers

What it really costs

Battery life cycles 3650 cycles warranty years
  • the manufacturer does not state the guaranteed total energy throughput, which for heavy users is often the limit that runs out first
How we worked it out
stated cycles
10000
warranty years
3650
Power-to-capacity ratio 0.500 C
How we worked it out
continuous power
2500
usable capacity
5

These numbers are calculated, not stated: they have no source to cite, they have a formula you can redo. The price used is the manufacturer's list price, which is stable and the same in every country — not a shop's price on the day.

03 · Summary

Pros and cons

In favour

  • It grows from 5.5 to 27.5 kWh in 5.5 kWh steps by adding battery modules.
  • It is compatible with Tigo Energy module optimizers. source
  • The backup power module is already integrated: it doesn't need to be added separately.
  • It uses lithium iron phosphate cells.

Worth knowing

  • Backup power covers only the selected appliances, not the whole home.
  • Several units of this model cannot be connected together: growth stops at 27.5 kWh.
  • The grid connection is three-phase: with a single-phase supply it is worth checking with the installer first.
Updates to this sheet and Manufacturer Notes
  1. Sheet published