Photo from the manufacturer
JouleSpecs does not sell and does not show shop prices: check the price where you buy.
RCT Power Storage DC 10.0 LAN is the three-phase hybrid inverter in the Storage DC range, the piece RCT Power Battery units need to become a system: it converts the current from solar, manages charging and discharging of the battery connected on DC, and powers the home on AC. Two MPPT trackers allow two panel strings facing different directions to be connected, for instance on two roof slopes.
It pairs with the RCT Power Battery family, up to two towers in parallel: on its own it stores nothing, and with no battery connected there's no capacity to put to use. In the event of a grid outage it can keep the system powered, but only together with the separate RCT Power Switch accessory.
Commissioning doesn't require internet access.
| Parameter | Value | Source |
|---|---|---|
| Dimensions | 58.5 × 20 × 57 cm (23.0 × 7.9 × 22.4 in) | manufacturer website |
| Weight | 32.0 kg (70.5 lb) | manufacturer website |
| Continuous output | 9900 W | Declared by the brand |
| Phases | Three-phase | Declared by the brand |
| Compatible batteries | RCT Power Battery 3.8-11.5 kWh in singola torre o in coppia (fino a due torri collegate), entro l'intervallo di tensione DC dichiarato per questa taglia (120-600 V). | Declared by the brand |
| Maximum solar input | 15000 W | Declared by the brand |
| MPPT trackers | 2 | Declared by the brand |
| Inverter efficiency | 98.35 % | Declared by the brand |
| Backup power | EPS (brief interruption) | Declared by the brand |
| Standby consumption | 6 W | Declared by the brand |
| Ingress protection | ip42 | Declared by the brand |
| Mounting | Wall mounted | Declared by the brand |
| Minimum temperature | -25 °C | Declared by the brand |
| Maximum temperature | 50 °C | Declared by the brand |
| Noise level | 35 dB | Declared by the brand |
| Works without internet | Fully | Declared by the brand |
| Local control | Local network | Declared by the brand |
| App required for setup | Yes | Declared by the brand |
| Declared standards | VDE-AR-N 4105, EN 50549 | Declared by the brand |
| Battery voltage | — | Not declared |
| Switchover time | — | Not declared |
| Dynamic tariffs | — | Not declared |
| Round-trip efficiency | — | Not declared |
| Cell heating | — | Not declared |
| Open protocols | — | Not declared |
| Home Assistant integration | — | Not declared |
| Where the data is hosted | — | Not declared |
| Remote updates | — | Not declared |
| Grid connection power | — | Not declared |
| Official list price | — | Not declared |
A manual or a datasheet counts as a source even when the original file is hosted elsewhere: what matters is the document, not the server. Where that happens, it is stated above.
